*This trigger must be active for the site. Every 4 hours, LightLevel will analyze the past 4 hours of meter and sensor data. LightLevel will calculate the site's expected production for that 4 hours a...
*This trigger must be active for the sensor. Every day, LightLevel will check sensor data from the previous day. If the sensor is not reporting any useful data, an alarm will be generated...
Fault State Trigger *This trigger must be active for the inverter. When new interval data comes in LightLevel will check the fault registers of an inverter and if any fault registers are active, will ...
There are two separate Alarm Triggers that measure imbalances on the meter and generate alarms: Voltage Imbalance, Amperage Imbalance. *The meter must have the trigger active to generate alarms. When...
Lost Communication *This trigger must be active for the meter. At every 15 minute interval, LightLevel makes a ping request to each meter in the system, to see if it can establish a connection. After ...